MULTIGRIPRIV-Blind rivet Alu/Steel gr 5,0-9,5 DH 3,2x12,7
Aluminium body. Steel mandrel. Dome head. Application: The head of the mandrel compresses the body of the rivet so that the fixing is obtained through compression and not expansion as it happens with standard blind rivets. The wide clamping capacity of this rivet makes it possible to use
Read full description
Description
Aluminium body.
Steel mandrel.
Dome head.
Application:
The head of the mandrel compresses the body of the rivet so that the fixing is obtained through compression and not expansion as it happens with standard blind rivets. The wide clamping capacity of this rivet makes it possible to use the same length for riveting a wider range of thicknesses and to have a higher hole tolerance. The head of the mandrel never breaks. This rivet is recommended for riveting boxes, parts subject to vibrations, special parts in aluminium, plastic and resin as it doesn’t warp these types of material.
Steel mandrel.
Dome head.
Application:
The head of the mandrel compresses the body of the rivet so that the fixing is obtained through compression and not expansion as it happens with standard blind rivets. The wide clamping capacity of this rivet makes it possible to use the same length for riveting a wider range of thicknesses and to have a higher hole tolerance. The head of the mandrel never breaks. This rivet is recommended for riveting boxes, parts subject to vibrations, special parts in aluminium, plastic and resin as it doesn’t warp these types of material.
Technical specifications
Marchio Statim | Rivit |
d - rivet diameter | 3,2 |
L - rivet length (mm) | 12,7 |
hole diameter (mm) | 3,3 |
T - head width (mm) | 6,3 |
k - head thickness (mm) | 1,0 |
grip range (mm) | 5,0 ÷ 9,5 |
shear strenght (N) | 740 |
tensile strength (N) | 950 |
body material | aluminium |
mandrel material | steel |
head type | dome |
STUBAI-Pinza piegatrice inclinata 45° Larga 40mm 282104
Item No.:
0401000
STUBAI-Tenaglie grandi diritte L.140mm 282314
Item No.:
0401700
Downpipe Expander Italian type w/connector SDSPLUS d.120
Item No.:
0392300
EDMA-Multicoup per tagli angolari 9700
Item No.:
1538300