JACKRIV-Inserto f.12 ss.0,4-4,8 ZB M6/C/L=18
Steel. Dome head. Jackriv rivet nuts allow female threads to be made on thin and soft materials to accommodate metric screws with pitch M4-M5-M6-M8. For each rivet nuts size, two different heights are available depending on the thickness of which Jackriv is used. One of the most interesting features
Bitte vollständig lesen
Beschreibung
Steel.
Dome head.
Jackriv rivet nuts allow female threads to be made on thin and soft materials to accommodate metric screws with pitch M4-M5-M6-M8.
For each rivet nuts size, two different heights are available depending on the thickness of which Jackriv is used.
One of the most interesting features of these rivet nuts is having large bearing surfaces on both sides of the assembly, wide head on one side and expansion of the four-part star-shaped material on the opposite side.
This provides a secure anchorage, especially on those materials where there are difficulties with bracketing: plywood, fiberglass, plastic, plexiglass.
Dome head.
Jackriv rivet nuts allow female threads to be made on thin and soft materials to accommodate metric screws with pitch M4-M5-M6-M8.
For each rivet nuts size, two different heights are available depending on the thickness of which Jackriv is used.
One of the most interesting features of these rivet nuts is having large bearing surfaces on both sides of the assembly, wide head on one side and expansion of the four-part star-shaped material on the opposite side.
This provides a secure anchorage, especially on those materials where there are difficulties with bracketing: plywood, fiberglass, plastic, plexiglass.
Spezifikationen
Marchio Statim | Rivit |
T - larghezza testa (mm) | 16,0 |
L2 - lunghezza fusto applicato (mm) | 5,0 |
L - lunghezza inserto (mm) | 18,0 |
k - spessore testa (mm) | 1,6 |
spessore serrabile (mm) | 0,4 ÷ 4,8 |
carico di prova assiale del filetto (N) | 343 |
coppia max di serraggio (Nm) | 14.0 |
d - passo dell'inserto | M6 |
diametro di foratura | 12,0 |
materiale corpo | acciaio |
tipo testa | tonda |
tipo fusto | cilindrico aperto |
AFT8017-Rivetto Alu/Acciaio TT TDM 3,4x7,0
Artikel-Nr.
0026800.10000
Sechskantkopfschraube UNI 5737/DIN 931 Teilgewinde 8.8 - Rohstahl M12x200
Artikel-Nr.
19853GR
Sechskantkopfschraube UNI 5738/DIN 960 Fein 8.8 - Stahl weiß verzinkt M10x1,25x100
Artikel-Nr.
20252ZB.00050